D-Link DHP-W306AV User Manual

30D-Link DHP-W306AV User Manual
Section 3 - Configuration
MAC Address Filter
Select  or  from the drop-down
menu.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please
refer to the Networking Basics section in this
manual. Click   to activate and
save.
 Make sure to enter the computer you
are currently using to congure the access
point rst or you will not be able to access
the conguration utility once you click Save
Settings.
Displays the list of clients in the lter list.
MAC Address
Filter:
MAC Address:
MAC Filter List:
Use MAC (Media Access Control) Filters to authorize wireless clients to access your network by their MAC addresses.
When enabled, any client not on the MAC lter list will not be able to access your network.

D-Link DHP-W306AV Specifications

Power

power input	240 V AC, 50/60 Hz
power saving mode	supported

Operating Environment

operating temperature	0º to 40ºC (30º to 104ºF)
operating humidity	10% to 95% non-condensing

Data Transmission

powerline data rate	200 Mbps (PHY rate)
ethernet data rate	10/100 Mbps (autonegotiation)
wireless data rate	up to 300 Mbps

Frequency and Modulation

powerline frequency band	2 MHz to 30 MHz
wireless frequency range	2.4 GHz to 2.497 GHz
powerline modulation scheme	OFDM Symbol Modulation

Weight and Dimensions

dimensions	105 x 70 x 52 mm (4.1 x 2.8 x 2.0 inches)
weight	208 g (0.46 lb)