D-Link DHP-W306AV User Manual

57D-Link DHP-W306AV User Manual
Section 5 - Connecting to a Wireless Network
Click on a network (displayed using the SSID) using WEP under
Select a network to connect to and then click the  button.
Enter the appropriate security key or passphrase in the eld
provided and then click thebutton.
Configure WEP
It is recommended to enable WEP on your wireless bridge or access point before conguring your wireless adapter.
If you are joining an existing network, you will need to know the WEP key being used.

D-Link DHP-W306AV Specifications

Power

power input	240 V AC, 50/60 Hz
power saving mode	supported

Operating Environment

operating temperature	0º to 40ºC (30º to 104ºF)
operating humidity	10% to 95% non-condensing

Data Transmission

powerline data rate	200 Mbps (PHY rate)
ethernet data rate	10/100 Mbps (autonegotiation)
wireless data rate	up to 300 Mbps

Frequency and Modulation

powerline frequency band	2 MHz to 30 MHz
wireless frequency range	2.4 GHz to 2.497 GHz
powerline modulation scheme	OFDM Symbol Modulation

Weight and Dimensions

dimensions	105 x 70 x 52 mm (4.1 x 2.8 x 2.0 inches)
weight	208 g (0.46 lb)