DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Installation and Connection
Connecting to PC
PC with Ethernet Adapter
1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router
and the Ethernet port of your PC.
2. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
Then make sure that your PC is configured to obtain an IP address automatically (as DHCP client).
Page 19 of 254
To Next Page
Loading...
Need help?
General
