IPv6 Static Route Setting
This allows you to set up static IPv6 routes to define how to route traffic for remote networks.
Static Route Setting
Connection Name: The connection name for the static route.
Enable: Whether to enable or disable the static route. Tick this to enable the static route.
The default is un-ticked.
Destination Address: The destination network to route traffic for.
Subnet Prefix Length: The destination prefix length to route traffic for.
Gateway: The router address to route traffic to for the route.
Metrics: The metric to associate with the route. This is used to prefer one route over another.
Click Back to go back to the previous page, click Apply to apply the settings
and click Refresh to refresh the page.
IPv6 Dynamic Route
This allows you to set up dynamic IPv6 routes to define how to route traffic for remote networks.
Dynamic Route
Port: Whether to enable or disable the dynamic routing on a port.
Tick this to enable dynamic routing on the port. The default is un-ticked.
Click Apply to apply the settings and click Refresh to refresh the page.
To Next Page
Loading...
Need help?
General
