58D-Link ShareCenter DNS-327L User Manual
Section 4 - Conguration
When rst powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via DHCP. If
it does not receive a DHCP assigned IP address, the ShareCenter will be automatically assigned a 169.254.xxx.xxx address. It
is recommended that you use the included D-Link Storage Utility software when accessing and conguring the ShareCenter
for the rst time. If you want to change the IP address before logging in or you are having trouble connecting to the Share-
Center IP address, you can use the Storage Utility software included on the product CD to locate the device on your network
and make any necessary changes.
D-Link Storage Utility
Network Storage
Device:
The D-Link Storage Utility displays any ShareCenter de-
vices it detects on the network here.
Refresh:
Click Refresh to refresh the device list.
Conguration:
Click Conguration to access the web-based congura-
tion utility of the ShareCenter.
LAN:
Congure the LAN Settings for the ShareCenter here. You
can only adjust these settings if Receive DHCP is dis-
abled.
Apply:
Click Apply to save changes to the LAN Settings.
Drive Mapping:
Volumes available for mapping are displayed here.
Available Drive
Letters:
Choose an available drive letter. Click Connect to map
the selected volume. Click Disconnect to disconnect the
selected mapped volume.
About:
Click About to view the software version of the Easy
Search Utility.
Exit:
Click Exit to close the utility.
To Next Page
Loading...
Need help?
General
