Daikin RX16MY1 User Manual

Si30-408 Field Settings from Remote Controller
Field Settings from Remote Controller 55
1.4 Test Operation Mode
Putting the system into test operation mode is available by operating the button of
remote controller.
1.4.1 Setting of Test Operation Mode
Test operation mode setting is available by operating as follows.
After setting of test operation mode, pressing the button starts to operate test
operation.
("TEST OPERATION" is displayed on the remote controller.)
Normal
operation
mode
Test operation
mode
Press the
button four times
ON/OFF

Daikin RX16MY1 Specifications

General

Brand	Daikin
Model	RX16MY1
Category	Inverter
Language	English