Si30-408 List of VRV Unit Models
Introduction 5
2.2 Nomenclature
2.2.1 Nomenclature (Previous indication)
Indoor Unit
Power supply symbol
V1 : Single phase 220 to 240V, 50Hz
VE : Single phase 220 to 240V, 50Hz : 220V, 60Hz
VAL : Single phase 220V, 60Hz
Indicates major design category
KA : Models for ceiling mounted low silhouette duct type
Models for ceiling suspended type
KB : Models for super cassette
KJ : Models applied for EC regulation
KF : Outdoor air processing unit
Capacity Indication
Conversion to horsepower:
20 : 0.8 HP 50 : 2.0 HP 125 : 5 HP
25 : 1 HP 63 : 2.5 HP 200 : 8 HP
32 : 1.25 HP 80 : 3.2 HP 250 : 10 HP
40 : 1.6 HP 100 : 4 HP
Refrigerant type
No indication : R22
P : R407C
Type of unit
C : Ceiling mounted cassette type (Double flow)
F : Ceiling mounted cassette type (Multi flow) – Super cassette –
K : Ceiling mounted cassette corner type
D : Ceiling mounted low silhouette duct type (Low static pressure)
S : Ceiling mounted built-in type
B : Ceiling mounted built-in (Rear suction)
M : Ceiling mounted duct type or outdoor air processing unit
H : Ceiling suspended type
A : Wall mounted type
L : Floor standing type
LM : Concealed floor standing type
N : Concealed floor standing type
Indicates that this is a INVERTER SERIES indoor unit.
FX : Cooling Only
FXY : Heat Pump
C 40
V1
KP
FXY
(V1217)