3.2 Parameters: 0-** Operation and Display
Parameters related to the fundamental functions of the
adjustable frequency drive, function of the LCP buttons and
configuration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option: Function:
Defines the language to be used in the
display. The adjustable frequency drive
can be delivered with 4 different language
packages. English and German are
included in all packages. English cannot
be erased or manipulated.
[0]
*
English Part of Language packages 1 - 4
[1] Deutsch Part of Language packages 1 - 4
[2] Francais Part of Language package 1
[3] Dansk Part of Language package 1
[4] Spanish Part of Language package 1
[5] Italiano Part of Language package 1
Svenska Part of Language package 1
[7] Nederlands Part of Language package 1
[10] Chinese Part of Language package 2
Suomi Part of Language package 1
[22] English US Part of Language package 4
Greek Part of Language package 4
Bras.port Part of Language package 4
Slovenian Part of Language package 3
Korean Part of Language package 2
Japanese Part of Language package 2
Turkish Part of Language package 4
Trad.Chinese Part of Language package 2
Bulgarian Part of Language package 3
Srpski Part of Language package 3
Romanian Part of Language package 3
Magyar Part of Language package 3
0-01 Language
Option: Function:
Czech Part of Language package 3
Polski Part of Language package 4
Russian Part of Language package 3
Thai Part of Language package 2
Bahasa Indonesia Part of Language package 2
[99] Unknown
0-02 Motor Speed Unit
Option: Function:
This parameter cannot be adjusted while the motor is
running.
The display showing depends on settings in 0-02 Motor
Speed Unit and 0-03 Regional Settings. The default
setting of 0-02 Motor Speed Unit and 0-03 Regional
Settings depends on which region of the world the
adjustable frequency drive is supplied to, but can be
re-programmed as required.
NOTE!
Changing the Motor Speed Unit will reset certain
parameters to their initial value. It is
recommended to select the motor speed unit
first before modifying other parameters.
[0]
*
RPM Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1]
*
Hz Selects display of motor speed variables and
parameters (i.e., references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
[0]
*
Interna-
tional
Activates 1-20 Motor Power [kW] for setting the
motor power in kW and sets the default value of
1-23 Motor Frequency to 50 Hz.
[1] US Activates 1-20 Motor Power [kW] for setting the
motor power in HP and sets the default value of
1-23 Motor Frequency to 60 Hz.
This parameter cannot be adjusted while the motor is
running.
Parameter Descriptions FC 300 Programming Guide
3-2 MG.33.MA.22 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
Need help?
General