Danfoss VLT 5000 Series Manual

49
MG.10.J4.02 – VLT is a registered Danfoss trade mark
VLT
®
5000 SyncPos option
■■
■■
■ "PARAMETERS" → "SAVE TO FILE"
With "PARAMETERS"
→→
→→
→ "SAVE TO FILE" you save
the user parameters including the arrays in a file
with the extension “.cnf”. This way you can quickly
load the parameters in another VLT or re-load them
in the VLT at any subsequent time, for example
after deleting the EEPROM.
Click on "SAVE AS" and enter a name in the subse-
quent dialog field or confirm the file name. The sug-
gested filename contains the date and time to be
safe from overwriting actual parameters in case of
restoring from file.
■■
■■
■ "PARAMETERS" → "RESTORE FROM FILE"
Click on "PARAMETERS"
→→
→→
→ "RESTORE FROM
FILE" and select the VLT in which the data should
be loaded.
Then select the file and click on "OPEN". The user
parameters saved, including the arrays, are imme-
diately loaded in the VLT.
■■
■■
■ "MEMORY" → "SAVE RAM"
The function save RAM is usually not needed since
the programs and parameters are automatically
saved.
With → "SAVE RAM" you can also save the current
array values in the EEPROM. "SAVE RAM" corre-
sponds to the command SAVEPROM, since all
programs, parameters and arrays are saved.
PC Software Interface

Danfoss VLT 5000 Series Specifications

General

Brand	Danfoss
Model	VLT 5000 Series
Category	DC Drives
Language	English