4.5 Kit Availability
Kit description
1)
E1 E2 F1 F2 F3 F4 F8 F9 F10 F11 F12 F13
USB in door O – O O O O O O O O O O
LCP, numerical O O O O O O O O O O O O
LCP, graphical
2)
O O O O O O O O O O O O
LCP cable, 3 m (9 ft) O O O O O O O O O O O O
Mounting kit for numerical LCP
(LCP, fasteners, gasket, and cable)
O O O O O O O O O O O O
Mounting kit for graphical LCP
(LCP, fasteners, gasket, and cable)
O O O O O O O O O O O O
Mounting kit for all LCPs
(fasteners, gasket, and cable)
O O O O O O O O O O O O
Top entry for motor cables – – O O O O O O O O O O
Top entry for mains cables – – O O O O O O O O O O
Top entry for mains cables with disconnect – – – – O O – – – – – –
Top entry for eldbus cables – O – – – – – – – – – –
Common motor terminals – – O O O O – – – – – –
NEMA 3R enclosure – O – – – – – – – – – –
Pedestal O O – – – – – – – – – –
Input options plate O O – – – – – – – – – –
IP20 conversion – O – – – – – – – – – –
Out top (only) cooling – O – – – – – – – – – –
Back-channel cooling (in-back/out-back) O O O O O O O O O O O O
Back-channel cooling (in-bottom/out-top) – O – – – – – – – – – –
Table 4.9 Available Kits for Enclosures E1–E2, F1–F4, and F8–F13
1) S = standard, O = optional, and a dash indicates that the kit is unavailable for that enclosure. For kit descriptions and part numbers, see
chapter 13.2 Ordering Numbers for Options/Kits.
2) The graphical LCP comes standard with enclosures E1–E2, F1–F4, and F8–F13. If more than 1 graphical LCP is required, the kit is available for
purchase.
Product Overview Design Guide
MG16C302 Danfoss A/S © 11/2017 All rights reserved. 19
4 4
To Next Page
Loading...
Need help?
General