The frequency converter complies with UL508C thermal
memory retention requirements. For more information,
refer to the section Motor Thermal Protection in the Design
Guide.
NOTICE
Imposed limitations on the output frequency
(due to export control regulations):
From software version 6.72 the output frequency of the
frequency converter is limited to 590 Hz. Software
versions 6x.xx also limit the maximum output frequency
to 590 Hz, but these versions cannot be flashed, i.e.
neither downgraded nor upgraded.
The following symbols are used in this document:
WARNING
Indicates a potentially hazardous situation which could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which could
result in minor or moderate injury. It may also be used
to alert against unsafe practices.
NOTICE
Indicates important information, including situations that
may result in damage to equipment or property.
How to Read these Operating... VLT AQUA Drive FC 202 Operation Instructions
MG20P402 - Rev. 2013-12-16 5
1
1
To Next Page
Loading...
Need help?
General