Danfoss vlt aqua Design Guide

1.1.2
Available Literature for VLT
®
AQUA DriveFC 200
-
VLT
®
AQUA Drive Instruction Manual MG.20.Mx.yy provides the neccessary information for getting the drive up and running.
-
VLT
®
AQUA Drive High Power Instruction Manual MG.20.Px.yy provides the neccessary information for getting the HP drive up and running.
-
VLT
®
AQUA Drive Design Guide MG.20.Nx.yy contains all the technical information about the drive and customer design and applications.
-
VLT
®
AQUA Drive Programming Guide MN.20.Ox.yy provides information on how to program and includes complete parameter descriptions.
-
VLT
®
AQUA Drive FC 200 Profibus MG.33.Cx.yy
-
VLT
®
AQUA Drive FC 200 DeviceNet MG.33.Dx.yy
- Output Filters Design Guide MG.90.Nx.yy
-
VLT
®
AQUA Drive FC 200 Cascade Controller MI.38.Cx.yy
- Application Note MN20A102: Submersible Pump Application
- Application Note MN20B102: Master/Follower Operation Application
- Application Note MN20F102: Drive Closed-loop and Sleep Mode
- Instruction MI.38.Bx.yy: Installation Instruction for Mounting Brackets Enclosure type A5, B1, B2, C1 and C2 IP21, IP55 or IP66
- Instruction MI.90.Lx.yy: Analog I/O Option MCB109
- Instruction MI.33.Hx.yy: Panel through mount kit
x = Revision number
yy = Language code
Danfoss technical literature is also available online at
www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/Technical+Documentation.htm .
1.1.3 Symbols
Symbols used in this guide.
NOTE!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
* Indicates a default setting
1 How to Read this Design Guide VLT
®
AQUA Drive Design Guide
1-2 MG.20.N5.22 - VLT
®
is a registered Danfoss trademark
1

Danfoss vlt aqua Specifications

General

Brand	Danfoss
Model	vlt aqua
Category	DC Drives
Language	English