Danfoss VLT AutomationDrive FC 360 Programming Guide

Option Name
[40] Drive stopped
[42] Auto Reset Trip
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[83] Broken Belt
4.12.6 13-5* States
13-51 SL Controller Event
Default value: [0] False Parameter type: Option, Array [20]
Setup: 1 setup Conversion index: –
Data type: Uint8 Change during operation: True
Select the 3rd boolean (true or false) input for the selected logic rule. See parameter 13-40 Logic Rule Boolean 1, parameter 13-41 Logic
Rule Operator 1, parameter 13-42 Logic Rule Boolean 2, and the boolean input. See parameter 13-01 Start Event ([0]–[61]) and parameter
13-02 Stop Event ([70]– [74]) for further description.
Option Name
[0] False
[1] True
[2] Running
[3] In range
[4] On reference
[7] Out of current range
[8] Below I low
[9] Above I high
[16] Thermal warning
[17] Mains out of range
224 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English