Danfoss VLT AutomationDrive FC 360 Programming Guide

0-39 Display Text 3
Default value: – Parameter type: Range
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: True
Free text, for example, used for the help tag of fieldbus application.
4.1.6 0-4* LCP Keypad
Enable, disable, and password protect individual keys on the LCP.
0-40 [Hand on] Key on LCP
Default value: [1] Enabled Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select [0] Disabled to avoid accidental start of the drive in [Hand on] mode. Setting can be locked by parameter 0-60 Main Menu
Password.
Option Name Description
[0] Disabled Avoid accidental start of the drive in [Hand
on] mode.
[1] Enabled [Hand on] mode is enabled.
0-42 [Auto on] Key on LCP
Default value: [1] Enabled Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select [0] Disabled to avoid accidental start of the drive in [Auto on] mode. Setting can be locked by parameter 0-60 Main Menu
Password.
Option Name Description
[0] Disabled Avoid accidental start of the drive in [Auto
on] mode.
[1] Enabled [Auto on] mode is enabled.
0-44 [Off/Reset] Key on LCP
Default value: [1] Enabled Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
46 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English