Danfoss vlt FC 102 Operating Guide

•
•
-
3 Mechanical Installation
3.1 Unpacking
3.1.1 Items Supplied
Items supplied may vary according to product configuration.
Make sure that the items supplied and the information on the product label correspond to the order confirmation.
Check the packaging and the drive visually for damage caused by inappropriate handling during shipment. File any claim for
damage with the carrier. Retain damaged parts for clarification.
e130bu821.11
1
2
5
4
3
6
7
8
Illustration 4: Product Label (Example)
1
Type code
2
Ordering number and serial number
3
Power rating
4
Voltage, frequency, and current (at low/high voltag-
es)
5
Enclosure type and IP rating along with maximum
ambient temperature
6
Enclosure frame size
7
QR code for additional documentation
8
Discharge time (warning)
N O T I C E
LOSS OF WARRANTY
Do not remove the product label from the drive.
3.1.2 Storage
Ensure that the requirements for storage are fulfilled, see the Ambient Conditions section.
3.2 Installation Environment
N O T I C E
REDUCED LIFETIME
In environments with airborne liquids, particles, or corrosive gases, ensure that the IP/Type rating of the equipment matches the
installation environment. Failure to meet requirements for ambient conditions can reduce lifetime of the drive.
Ensure that requirements for air humidity, temperature, and altitude are met.
Vibration and shock
The drive complies with requirements for units mounted on the walls and floors of production premises, and in panels bolted to
walls or floors. For detailed ambient conditions, refer to the Ambient Conditions section.
AQ267037536117en-000101 / 130R0083 | 17Danfoss A/S © 2023.09
Mechanical Installation
VLT HVAC Drive FC 102
Operating Guide

Danfoss vlt FC 102 Specifications

General

Brand	Danfoss
Model	vlt FC 102
Category	DC Drives
Language	English