DataCard SD460 User Manual

XPS Card Printer Driver User’s Guide 93
Select the Rewrite Option
When a card printer supports rewritable card printing, the Rewrite check box is enabled on the
Print Mode tab. If the printer does not support rewritable cards, the Rewrite option is not
available.
When you select the Rewrite option on the Print Mode tab, the Print Area tab displays the erase
options for a rewritable card. Refer to “Select an Erase Pattern” on page 86.
1. Open the Printing Preferences window.
2. Select the Print Mode tab.
3. Select the Print using rewritable cards
check box.
4. Click Apply to save your changes and
then click OK to close the Printing
Preferences window.
Only valid Print Resolution options
are available.
Printing rewritable cards requires several settings in Printer Manager and in the Card
Printer Driver. Refer to “Printer Setup for Rewritable Cards” on page 96 for a complete
discussion about how to set up your system to use the rewritable feature.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm