DataCard SD460 User Manual

XPS Card Printer Driver User’s Guide 79
Input Hopper
For printers that have an optional multi-hopper, the Input Hopper setting allows you to select the
hopper to use when you print a card. This setting does not display for single-hopper printers.
You also can use an escape to specify the input hopper to use. Refer to “Input Hopper Selection
Escape” on page 111 for more information.
1. Open the Printing Preferences window.
2. On the Layout tab, click Advanced.
3. Click Input hopper and select the
hopper number. The default is hopper 1.
4. Click OK to save your selection and then
click Apply on the Layout tab.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm