DataCard SD460 User Manual

64 Card Design Tasks
Change a Card Design
Card design refers to the combined features of the printed cards.
An organization can change:
 The arrangement of card components, such as moving a photo from the center to the left
side of the card.
 The source for card components, such as using a different camera for taking photos, or using
a new file for a logo.
 The components on the card, such as adding a magnetic stripe, a logo, or a bar code.
Whenever the card design changes, review the settings used for the card. Use this checklist to
guide your changes. Always:
 Use high-quality photos and graphics.
 Print several samples of the updated card design.
 Use cards with a magnetic stripe or bar code in a reader to verify that the data works as
expected.
 Check the Color Adjustment settings if you change a graphic on the card, change the camera
for taking photos, or change the location where photos are taken. Refer to “Color Printing” in
your printer’s Installation and Administrator’s Guide for information about how to improve
the appearance on one element on a card.
 Refer to your printer’s Installation and Administrator’s Guide if you are changing a bar code
or magnetic stripe.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm