DataCard SD460 User Manual

54 Card Printer Driver Management Tasks
The Card Printer Driver Supplies tab shows the following supply information:
Supply Status OK
The supply is installed, and at least 10% of the roll
remains.
Low
The supply is installed, and less than 10% of the roll
remains.
Unknown
The supply is missing or is not valid.
Remaining The percent of supply remaining.
Supply The name of the installed supply.
Part Number The part number of the supply. (If a part number is not available,
a series of dashes displays.)
Ribbons that have a region code display with a prefix of -Rxxx
before the part number, where xxx is the region code.
Description A short description of the supply, if one is available. For example,
a print ribbon can display as YMCKT. If an installed supply is not
supported by the printer, “Not supported” displays. If a supply is
not installed, “Not installed” displays.
Note: A card printer configured to print rewritable cards shows
the print ribbon as Not installed.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm