Programming
5-100 Magellan
TM
2200VS and 2300HS
Connect to a Laptop/No Keyboard Attached
If no keyboard is attached, the scanner must provide the acknowledge sig-
nal to the PC. In this case, enable the "Laptop/No External Keyboard"
mode. If a keyboard is attached, enable "Keyboard Attached."
Laptop (no external keyboard):
provides the acknowledge signal to
the PC when the scanner is connected to a laptop computer or when the
scanner is operated with no external keyboard.
Keyboard attached:
is enabled when the scanner is connected to a stan-
dard PC with an external keyboard.
LAPTOP (NO EXTERNAL KEYBOARD)
KEYBOARD ATTACHED
NOTE
This feature applies to PC Keyboard Wedge ONLY.