Programming
5-188 Magellan
TM
2200VS and 2300HS
RSS Expanded Length Control
This feature specifies either variable-length or fixed-length decoding for
RSS Expanded.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RSS EXPANDED LENGTH CONTROL = VARIABLE-LENGTH
RSS EXPANDED LENGTH CONTROL = FIXED-LENGTH
NOTE
If variable-length control was selected, you must now set the fea-
tures RSS Expanded Maximum Label Length and RSS
Expanded Minimum Label Length. If fixed-length control was
selected, you must now set RSS Expanded Fixed Length 1 and
RSS Expanded Fixed Length 2.