To Next Page

To Previous Page

Enter/Exit Programming Mode

150

PowerScan™ PD953X/PBT950X/PM950X

Code 11 Set Length 2

This feature specifies one of the bar code lengths for Code 11 Length Con-

trol. Length 2 is the maximum label length if in Variable Length Mode, or the

second fixed length if in Fixed Length Mode. Length includes the bar code’s

check and data characters.

The length can be set from 2 to 50 char

acters. A setting of 0 specifies to

ignore this length (only one fixed length).

Table 17 provides examples for setting Length 2. See page 282 for detailed

instructions on setting this feature.

Table 17. Code 11 Length 2 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zeroes)

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 11 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ and 0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC1.2

Select Code 11 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start

again at the beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters

Datalogic PowerScan PBT950X User Manual

Other manuals for Datalogic PowerScan PBT950X