Datalogic PowerScan PBT950X User Manual

Enter/Exit Programming Mode
Product Reference Guide 259
Mode Selection
This feature allows the PowerScan 16K model to operate in one of two basic
operative modes:
• Normal Mode — data entered, either
on the keypad or read via bar-
code, is transmitted to the host once the en
ter key is pressed, follow-
ing the configured formatting.
• Quantity/Code Mode — Can be further configured. See the next sec-
tions for Qty/Code operations. .
$CDISM00\r
Set Normal Mode
DEFAULT
$CDISM01\r
Set QtylCode Mode
Quantity Field
This feature defines the behavior of the scanner if no data is entered in the
QTY field so that it is left empty. Options are:
• code is transmitted with default QTY (‘1’)
• code is transmitted alone (without any quantity information)
• code is discarded and an error beep is generated
$CPWEK00\r
Transmit code with default qty (1)
DEFAULT
$CPWEK01\r
Transmit Code only
$CPWEK02\r
Discard Code

Datalogic PowerScan PBT950X Specifications

General

Brand	Datalogic
Model	PowerScan PBT950X
Category	Barcode Reader
Language	English