Enter/Exit Programming Mode
Product Reference Guide
65
LED AND BEEPER INDICATORS
Power On Alert
Disables or enables the indication (from the Beeper) that the reader is
receiving power.
Power On Alert = Disable (No Audible Indication)
Power On Alert = Power-up Beep
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or
flash its green LED) upon successfully reading a bar code.
DEFAULT
Indicate Good Read = After Decode
Indicate Good Read = After Transmit
Indicate Good Read =
After CTS goes inactive then active
To Next Page
Loading...
Need help?
General
