To Next Page

To Previous Page

Enter/Exit Programming Mode Codabar

148 QuickScan™ I QD24XX/QBT24XX/QM24XX

Codabar Set Length 1

This feature specifies one of the bar code lengths for Codabar Length Control on page 147Cod-

abar Length Control on page 147. Length 1 is the minimum label length if in Variable Length on

page 243 Mode, or the first fixed length if in Fixed Length on page 243 Mode. Length includes

the bar code’s start, stop, check and data characters. Th

e l

ength must include at least one data

character. The length can be set from 3 to 50 characters.

Table 13 provides some examples for setting Length 1. See page 243 for detailed instructions

on setting this feature.

Table 13. Codabar Length 1 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (and pad

with leading ze

roes)

03 Characters 09 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODABAR LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘3’ ‘0’ and ‘9’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CCBL1

Select Codabar Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

03 = Length 1 is 3 Characters

Datalogic QuickScan QM24 Series User Manual

Questions and Answers: