Datalogic QuickScan QM24 Series User Manual

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 155
Code 11 Set Length 1
This feature specifies one of the bar code lengths for Code 11 Length Control on page 154.
Length 1 is the minimum l
abel length if in Variable Length on page 243 Mode, or the first fixed
length if in Fixed Length on page 243 Mode. Length includes the bar code’s check and data
c
haracters. The length can be set from 2 to 50 characters.
Table 15 provides some examples for setting Length 1. See page 243 for detailed instructions
on setting this feature.
Table 15. Code 11 Length 1 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (pad with
leading zeroes)
02 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘2’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC1L1
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
04 = Length 1 is 4 Characters

Datalogic QuickScan QM24 Series Specifications

General

Brand	Datalogic
Model	QuickScan QM24 Series
Category	Barcode Reader
Language	English