Datalogic QuickScan QM24 Series User Manual

Enter/Exit Programming Mode Multiple Label Reading
86 QuickScan™ I QD24XX/QBT24XX/QM24XX
Multiple Labels Ordering by Code Symbology
This feature allows you to specify the order multiple labels are transmitted by symbology type,
when Multiple Labels per Frame is enabled. See page 260 in “References” for detailed informa-
tion on setting this feature.
$CSNMS
Select Symbologies for Multiple Labels Ordering
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits From the
alphanumeric char-
acters In Appendix d, keypad representing your desired
Character(s). end by scanning the enter/exit bar code
aga
in.
Make a mistake? Scan the CANCEL bar code to abort and
not save
t
he entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
000000000000 = Random order
Multiple Labels Ordering by Code Length
Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.
DEFAULT
$CSNMT00(CR)
Multiple Labels Ordering = Disable
$CSNMT01(CR)
Transmit Increasing Length Order
$CSNMT02(CR)
Transmit Decreasing Length Order

Datalogic QuickScan QM24 Series Specifications

General

Brand	Datalogic
Model	QuickScan QM24 Series
Category	Barcode Reader
Language	English