Identifier GUID-85E904E9-9739-40E9-B16E-44C3F6C759A5
Status Released
Clearing CMOS settings
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Identifier GUID-80B6901A-84B9-4E89-AECE-A1BD484B2AEF
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the system-board shield.
Identifier GUID-C7BAECA4-7AAA-4060-8F52-F412C70D591D
Status Released
Procedure
NOTE: For more information on the location of the CMOS reset jumper, see
“
System-board components”.
1 Remove the jumper plug from the password jumper-pins and connect it to the
CMOS jumper pins.
136
To Next Page
Loading...
Need help?
General
