Identifier GUID-411D5FFA-086D-432E-9CE3-0ECBF9B7BA71
Status Released
Replacing the back cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-A39F4C70-2FEA-4CD3-8A1E-0D1CC3DA91BC
Status Released
Procedure
1 Align the tabs on the back cover with the slots on the inner frame.
2 Slide the back cover towards the bottom of the computer, and snap the back
cover in place.
3 Tighten the captive screws that secure the back cover to the inner frame.
23
To Next Page
Loading...
Need help?
General
