Getting Started: Quickly Learning the Basics 9
Accessing Thin Client Boot Order Settings
1. Power off the device.
2. Press and hold the Delete key while pressing and holding the Power button to
power on the device. When the Activity light (next to the Power button) blinks,
release the Power button. When the BIOS password prompt is displayed, release the
Delete key.
3. Type Fireport as the password to enter and use the WLoader Setup. For example,
you can use the Boot Order to select the boot option you want.
Restoring the Complete Image
1. Power off the device.
2. Press and hold the P key while pressing and holding the Power button to power on
the device. When the Activity light (next to the Power button) blinks, release the
Power button. When the BIOS password prompt is displayed, type Fireport as the
password.
3. When the one-time boot menu of options is displayed, select the Recovery option
and then press Enter (restores the complete image and removes any updated
package).
To Next Page
Loading...
Need help?
General
