18 Chapter 3
Date & Time
Use the Date/Time Properties dialog box (click Date & Time) to set Date & Time and
Time Zone options. After configuring, be sure to click OK.
Use the Date and Time tab to:
• Synchronize with a Network Time Protocol (NTP) server - Enter the IP Address or
hostname of the NTP server (the current NTP server is shown) to synchronize the
clock time and date of the thin client. You can also use Add, Edit, and Delete to
manage your list of NTP servers available.
• Manually set the date and time - Clear the Synchronize date and time over the
network check box, and then select your date and time settings.
Use the Time Zone tab to select your time zone and whether or not to automatically
enable daylight savings time (select or clear the System clock uses UTC check box).
To Next Page
Loading...
Need help?
General
