48 Chapter 4
SSH
Use the SSH Configuration dialog box (click SSH) to set SSH connection
configurations. After configuring, be sure to click OK.
TIP: X forwarding/tunneling is automatic and allows you to execute remote X
applications.
Network
Use the Network tab to configure the network settings:
• Description - Enter a name/label for the connection.
• Host - Enter a host name or IP address.
• Remote Username - Enter a username.
• Remote Command - Enter the command to execute on the server.
Connection
Use the Connection tab to configure the connection settings:
• Auto Connect - Starts the connection automatically after system startup.
• Ping Before Connect - Pings the connection to see if it is reachable before the
connection is attempted.
• Auto Reconnect - Reconnects automatically after a disconnection occurs.
• Delay before retrying - Select the amount of time to delay the reconnection
attempt after a disconnection occurs.
To Next Page
Loading...
Need help?
General
