Configuring System Settings 21
Display
Use the Monitor Preferences dialog box (click Display) to set the monitor display
preferences (Primary Display Output, Resolution, Refresh Rate, and Rotation). For most
monitors, resolution is obtained automatically from the monitor. After configuring, be
sure to click Apply.
TIP: Dual Monitors - When using a DVI to DVI/VGA splitter with VGA and DVI monitors
at the same time, note that the VGA monitor will be the primary monitor.
TIP: Single-monitor resolution - Maximum is 1920x1080 (16:9); Minimum is 640x480
(4:3).
Dual-monitor resolution - Maximum is 1280x1024 (5:4); Minimum is 720x400 (9:5).
Ericom PowerTerm
®
TEC (Managing Servers Available for Connections)
• Use the Ericom PowerTerm Terminal Emulation dialog box (click Ericom
PowerTerm) to view and manage (add and delete) the list of servers that are
presented when an Ericom PowerTerm
®
TEC connection is being configured for
thin client access to network resources as described in "Ericom PowerTerm® TEC."
Use the following guidelines:
• Adding a hostname - Click Add to open the Add host dialog box, enter a
Hostname, and then click OK. The hostname is added to the Hostname list.
• Deleting a hostname - Select a hostname and click Delete. The hostname is
removed from the Hostname list.
To Next Page
Loading...
Need help?
General
