40 Chapter 4
Login
TIP: The User Name, Password, Domain, and Serial Number fields are optional. If the
User Name, Password, and Domain fields are blank, interactive login is required (users
must enter the information at login time).
Use the Login tab to configure credentials used to automatically log in to the server:
• User Name - Enter a user name for the connection.
• Password - Enter the password.
• Domain - Enter the domain name.
• Published Apps (Published Application Only) - Select a published application from
the Published Apps list. If needed, click Refresh to refresh the list of published
applications.
• Serial Number - Enter the serial number for Metaframe environments that require
the thin client license serial number.
• Connect automatically after login - Enables an automatic connection after
successful login to the thin client.
Auto Reconnect
Use the Auto Reconnect tab to enable automatic reconnect after a disconnection
(select the Enable Auto Reconnect check box, and then select the amount of time to
delay the reconnection attempt after a disconnection occurs).
Firewall
TIP: Published applications and Storefront do not support Firewall functions.
Use the Firewall tab to configure an alternate address for firewalls:
• Automatically detect proxy - Select to automatically detect the proxy type.
• Use Alternate Address for Firewalls - Select Yes to use an alternate address for
firewalls.
• Proxy Type - Select a proxy type.
• Proxy Address and Port - If you select Secure (HTTPS) or SOCKS as the Proxy Type,
you must enter the Proxy Address and Port.
To Next Page
Loading...
Need help?
General
