3.2. Mount the Inverter
This unit is designed to be wall-mounted. Please ensure the installation is
perpendicular to the floor and the AC plug at the bottom. Do not install the
device on a slanting wall.
To mount the inverter on the wall, please follow the procedure below:
1.Screw the mounting bracket on the wall with 8 M6 Phillips head screws.
Please refert to figure 3-4.
2.Attach the inverter to the mounting bracket.
3.Use Hex Wrench fixing the inverter with 2 M4 Hexagon Socket screws.
Please refer to figure 3-5.
Figure 3-2 Correct and incorrect installation
10
Installation
To Next Page
Loading...
Need help?
General
