5.3.4. Inverter Information
This page can helps user to recognize the inverter. First section displays
serial number, installation date, ID, and firmware version. Another 3 sections
displays the settings of inverter functions. For more infromation about these
settings, please refer to 5.3.6 Install Settings, 5.3.7 Active/Reactive power,
and 5.3.8 FRT (Fault ride through).
Figure 5-8 Inverter information page
S/N: RN11179CB0
Install: 30/04/2014
DSP 1.80 Red. 1.65
Comm. 1.65 ID: 002
AC connection:
Max. Power:
Dry Cont:
EPO:
3P4W
10500W
Insulation
Normal Close
Country:
Insulation:
Baud Rate:
Germany MV
1200k
19200bps
►
Grid Settings
Active Pwr Settings
React Pwr Settings
FRT Settings
Link to settings page but read only.
or
ENT
or
ENT
or
ENT
29
Turn on/off PV inverter
To Next Page
Loading...
