DC Injection
Dry Cont.
RCMU
EPO
►
Insulation
ON
Normal Open
5.3.6.6. EPO
EPO function has 2 detection methods: Normal Open and Normal Close.
Normal Open means EPO pins are usually open-circuited. When these
two pins are short-circuited, inverter will shut down immediately. Normal
Close is contrary to Normal Open. Please choose an appropriate detection
method according to your needs.
5.3.6.7. AC connection
RPI M6A/ M8A/ M10A models can support 3P3W and 3P4W system.
Please select the correct AC wiring type.
5.3.6.8. Max Power
Electricity regulation in some area requests that inverter must have power
limit function. In these areas, users can adjust Max Power to limit the
maximum output power of the inverter.
Figure 5-16 EPO page
Figure 5-17 AC connection page
Figure 5-18 Max Power page
AC Connection
Anti-islanding
Max. Power
Return to Factory
►
3P4W
ON
10500W
AC Connection
Anti-islanding
Max. Power
Return to Factory
►
3P4W
ON
10500W
34
Turn on/off PV inverter
To Next Page
Loading...
Need help?
General
