Delta VFD1A5MS43ANSAA User Manual

Chapter 12 Descriptions of Parameter SettingsMS300
451
14 Protection Parameters (2)
You can set this parameter during operation.
14-50
Output Frequency at Malfunction 2
14-54
Output Frequency at Malfunction 3
14-58
Output Frequency at Malfunction 4
14-62
Output Frequency at Malfunction 5
14-66
Output Frequency at Malfunction 6
Default: Read only
Settings
0.00–599.00 Hz
 When an error occurs, you can check the output frequency for the malfunction. If the error
happens again, this parameter overwrites the previous record.
14-51
DC bus Voltage at Malfunction 2
14-55
DC bus Voltage at Malfunction 3
14-59
DC bus Voltage at Malfunction 4
14-63
DC bus Voltage at Malfunction 5
14-67
DC bus Voltage at Malfunction 6
Default: Read only
Settings
0.0–6553.5 V
 When an error occurs, you can check the DC bus voltage for the malfunction. If the error
happens again, this parameter overwrites the previous record.
14-52
Output Current at Malfunction 2
14-56
Output Current at Malfunction 3
14-60
Output Current at Malfunction 4
14-64
Output Current at Malfunction 5
14-68
Output Current at Malfunction 6
Default: Read only
Settings
0.00–655.35 Amps
 When an error occurs, you can check the output current for the malfunction. If the error happens
again, this parameter overwrites the previous record.
14-53
IGBT Temperature at Malfunction 2
14-57
IGBT Temperature at Malfunction 3
14-61
IGBT Temperature at Malfunction 4
14-65
IGBT Temperature at Malfunction 5
14-69
IGBT Temperature at Malfunction 6
Default: Read only
Settings
-3276.7–3276.7
o
C
 When an error occurs, you can check the IGBT temperature for the malfunction. If the error
happens again, this parameter overwrites the previous record.

Delta VFD1A5MS43ANSAA Specifications

General

Brand	Delta
Model	VFD1A5MS43ANSAA
Category	DC Drives
Language	English