Chapter 13 Warning CodesMS300
471
Warning Codes
Summary of Warning Codes
PLC opposite defect (PLod)
Communication error 1 (CE1)
PLC save memory error (PLSv)
Communication error 2 (CE2)
Communication error 3 (CE3)
Communication error 4 (CE4)
PLC buffer overflow (PLor)
Communication error 10 (CE10)
IGBT overheating warning (oH1)
ACI analog signal loss (AnL)
PLC scan time fail (PLSF)
Over speed warning (oSPd)
Speed deviation warning (dAvE)
ExCom factory defect (ECFF)
Motor overheating (oH3) PTC / PT100
ExCom Parameter data error (ECPP)
ExCom configuration data error (ECPi)
Ethernet link fail (ECEF)
Communication time-out (ECto)
CANopen guarding time-out (CGdn)
CANopen heartbeat error (CHbn)
CANopen BUS off error (CbFn)
CANopen index error (CIdn)
CANopen station address error (CAdn)
CANopen memory error (CFrn)
CANopen SDO time-out (CSdn)
Copy PLC: password error (CPLP)
CANopen SDO receives register overflow
(CSbn)
Copy PLC: Read mode error (CPL0)
CANopen start-up error warning (Cbtn)
Copy PLC: Write mode (CPL1)
CANopen format error (CPtn)
Copy PLC: version error (CPLv)