Getting Started Setup Playback Information Troubleshooting
ENGLISH
Specications
"6%*0
"6%*0
3-
065065
$0"9*"-
R
L
R
L
CD Player
Select the terminal to use and connect the device.
CD player
iPod
®
iPod
• With the default settings, the iPod can be used connected to the
VCR (iPod) connector.
• To assign the iPod to a connector other than VCR (iPod), make the
settings at “iPod Assign” – “Assign” (vpage 16).
Use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3N or
ASD-3W, sold separately) to connect the iPod to the AVR-390. For
instructions on the control dock for iPod settings, refer to the control
dock for iPod’s operating instructions.
NOTE
To playback iPod Video or Photos on a TV monitor, connect the
TV to the S-Video Out terminal of AVR-390.
ASD-3N or
ASD-3W
47*%&0
3-
065
"6%*0 7*%&0
065
"6%*0 7*%&0
065
015*$"-
065
065
)%.*
$0.10/&/57*%&0
: 1# 13
065
R
L
R
L
TV/CABLE Tuner
Select the terminal to use and connect the device.
TV Tuner
NOTE
The audio signal input to the HDMI input connector cannot be
played on the AVR-390. Input the audio signal to the digital audio
input connector or analog audio input connector.
NOTE
Because video signals are output from the AVR-390’s monitor output
terminal in the same format as the video input signals, the monitor
output terminal should be of the same type as the terminal used
for input.
Connections
To Next Page
Loading...
Need help?
General
