Denon AVR-X7200W User Manual

Checking the HD Radio reception
information
1
Press STATUS on the main unit while an HD Radio
broadcast is being received.
The current reception information is shown on the display.
.
1. Normal
$
2. Frequency / Signal strength
$
3. Long Station name / Program and Program type
$
4. Title name / Artist name
$
5. Album name / Genre name
If the station signal weakens while receiving a digital broadcast (while “HD” and text
is displayed), the mode automatically switches to the analog reception mode (the
reception frequency is displayed).
Because of this, the “HD” and text may flicker if the station signal level is weak and
unstable.
Contents Connections Playback Settings Tips Appendix
112
Front panel Display Rear panel Remote Index

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g