Upgrade
Upgrade (Auro-3D)
The text marked with this symbol that will enable after the upgrade of the Auro-3D.
You can experience the best performance of Auro-3D if you install Front Height and Surround Height in addition to standard 5.1-channel. The “Setup
Assistant” will lead you to this setting.
You can use Rear Height speakers from a Dolby Atmos speaker setup instead of Surround Height speakers for Auro-3D playback.
The AVR also can play Auro-3D using standard 5.1-channel and Front Height speakers. If you install any height speakers instead of Surround Height
speakers and Rear Height speakers, you can set the speaker configuration in setup menu.
Auro-3D
Features
High quality sound 14
Connecting speakers
Speaker installation 35, 38
Layout including height speakers and top speakers 42
Speaker configuration and “Amp Assign” settings 47
Auro-3D 9.1/10.1-channel system 63
Selecting a sound mode
Description of sound mode types Auro-3D sound mode 157
Sound mode that can be selected for each input signal 166
Audio
Auro-Matic 3D Preset 193
Auro-Matic 3D Strength 193
Inputs
Decode Mode 223
Manual Setup
Amp Assign 238, 239, 240, 258
Speaker Config. 263
Appendix
Sound modes and channel output 340
Sound mode and surround parameters 344
Types of input signals, and corresponding sound modes 348
Explanation of terms 351
Trademark information 365
Contents Connections Playback Settings Tips Appendix
9
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
