Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2 / ZONE3
Set Defaults: The default setting is restored for the edited zone name.
Up to 10 characters can be input.
For character input, see “Using the keyboard screen” (v p. 188).
Quick Select Names
Change the quick select name that appears on the TV screen to one you
prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
Set Defaults:
The default setting is restored for the edited quick select
name.
Up to 16 characters can be input.
For character input, see “Using the keyboard screen” (v p. 188).
Remote ID
Set when you operate another Denon AV amplifier with the remote control
unit of this unit. Match the remote control unit you are using with the
remote ID of this unit.
o
Settings
1
Press ZONE SELECT to switch the zone mode.
The J indicator lights.
2
Press SETUP.
The menu is displayed on the TV screen.
3
Use ui to select “General”, then press ENTER.
4
Use ui to select “Remote ID”, then press ENTER.
5
Change the ID for the remote control unit. (v p. 305)
6
Press ENTER.
The Remote ID for this unit is set to the same ID as the one for the
remote control unit.
Contents
Connections Playback Settings Tips Appendix
282
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
