Denon AVR-X7200W User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 189
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 189
Surround Parameter Adjusts surround sound parameters. 190
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
197
Audio Delay Compensates for incorrect timing between video and audio. 198
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 198
Audyssey
Set Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic Volume
®
,
Audyssey LFC
TM
and Audyssey DSX
®
.
199
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 203
.
Video
Picture Adjust Adjusts picture quality. 205
HDMI Setup Makes settings for HDMI video/audio output. 207
Output Settings Makes settings for video output. 212
Analog Video Out Assigns the zone that uses the COMPONENT VIDEO MONITOR OUT and the VIDEO
MONITOR OUT connectors.
216
On Screen Display Configures the on-screen display settings. 217
TV Format Sets the video signal format to be output for the TV you are using. 218
Contents Connections Playback Settings Tips Appendix
Settings
183
Front panel Display Rear panel Remote Index

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g