Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
0
If you change the speaker settings after performing Audyssey
®
Setup,
you will no longer be able to select Audyssey MultEQ
®
XT32, Audyssey
Dynamic EQ
®
or Audyssey Dynamic Volume
®
. (v p. 199 - 201)
0
This unit can be used without changing “Manual Setup” settings. Please
set if necessary.
Amp Assign
Select the power amplifier usage method to match your speaker system.
o
Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
11.1ch:
0
Setting to use the 9-channel power amplifier in this unit
and an external power amplifier connected to PRE OUT to
play back up to 11.1 channels.
0
You can connect speakers for up to 13.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 11.1-channels in accordance with the
input signal and sound mode. (v
p. 239)
9.1ch:
0
Settings to assign all power amplifier within this unit to
MAIN ZONE to play back up to 9.1 channels.
0
You can connect speakers for up to 11.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 9.1-channels in accordance with the input
signal and sound mode. (v
p. 243)
Contents Connections Playback Settings Tips Appendix
235
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
