Digi Connect SP User Manual

Digi Connect and ConnectPort TS Family web interface Configuration through the web interface
Digi Connect Family and ConnectPort TS Family
82
Manage alarms through Remote Manager
You can configure the alarms sent to Remote Manager. You can also view and manage alarms from
the Remote Manager interface. See Alarms Configuration for more information.
Users
User settings involve several areas:
n User authentication: Whether authentication is required for users accessing the Digi Connect
and ConnectPort TS Family device and the information required to access it. Depending on the
Digi device, you can define multiple users and their authentication information. User
authentication settings are on the Users settings page.
n User access settings: Device interfaces that a user can access, such as the command line or
web interface.
n User permissions settings: Permissions a user has for accessing and configuring the device.
n Several settings on the Network Configuration pages are available to further secure the Digi
Connect and ConnectPort TS Family product. For example, you can disable unused network
services on the Network Services page.
About user models and user permissions
The Digi Connect and ConnectPort TS Family products provides the following user models:
n Two-user model
n More than two-user model
To determine which user model to implement:
In the web interface, if the menu includes Users, the Digi Connect device uses either the two-user
model or the more than two users model.
In the command-line interface, issue a show user or set user command. In the command output, note
how many user IDs are defined: one, two, or more than two. Or, issue a setuser? command and note
the range for the id=range option. If the id=range is not listed, there is only one user. Otherwise, the
range for user IDs appears. These commands are described in the Digi Connect® Family Command
Reference.
Two-user model
n User 1 has a default name of root. This user is also known as the administrative user.
n User 1 has default permissions that enables it to issue all commands.
n You can change permissions for User 1 to be less than the default root permissions.
n User 2 is undefined. That is, the user does not exist by default, but you can define User 2.
n Use the User Permissions settings in the web interface or the setpermissions command in
the command-line interface (see the Digi Connect® Family Command Reference for command
description) to configure the permissions for User 2.
n You can change permissions for User 2 to be either greater than or less than its default.
More-than-two-user model
User definitions are exactly the same as the two-user model, with the addition of user groups and
more users. The set group command defines user groups; see the Digi Connect® Family Command

Digi Connect SP Specifications

General

Brand	Digi
Model	Connect SP
Category	Server
Language	English