Domino F Series User Guide

11
HEALTH AND SAFETY
General
The F-Series laser marking systems are designed and built in
accordance with international standards and other technical
specifications, which are to be observed. The equipment conforms to
current technology and approved safety requirements.
Domino F-Series laser marking systems are produced by Domino
Group company; Domino Laser GmbH Germany. For Sales and
support, contact Domino.
This safety standard, however, can only be achieved if all intended and
required measures have been taken and are constantly observed. It is
part of the equipment operator’s duties to plan these measures and
check their continuing implementation.
The F-Series laser marking systems have been developed and
designed for fully automated marking of packaging materials and
products by use of laser radiation.
The user must ensure that:
• The laser system is only made ready for use after it has been
installed and guarded to Class 1 laser safety standards (EN60825)
• The equipment is only to be used for its intended purpose
• The equipment is only operated in a good, serviceable condition,
and that all safety installations are regularly checked for their
serviceability
• Personal protective goggles for maintenance and repair personnel
are required and made available
• Only suitable and approved tools and equipment are used
• The product manual is complete and in a legible condition at the
equipment location at all times
• The valid rules and laws regarding accident prevention are available
and observed
• Only sufficiently qualified and authorised personnel shall operate,
maintain, and repair the laser marking system

Domino F Series Specifications

General

Brand	Domino
Model	F Series
Category	Measuring Instruments
Language	English