15
Scan Head Mirrors
Never touch the mirrors of the scan head.
The mirrors are inside the scan head and there is a small risk of touching
them when cleaning the lens.
The mirrors for the i-Tech 15 scan head are made of Beryllium.
If the mirrors have been touched accidentally, wash hands thoroughly
with water and soap.
Fumes and dust from Beryllium metal can be hazardous if inhaled.
Noise
All systems emit during operation a noise level lower than 80dB(A). No
personal protective equipment against noise is needed.
Crushing
There is a crushing hazard during installation and operation due to:
• Product moving along the laser head.
• Products moving into and out of protective housing.
• Doors and maintenance openings of protective housings.
To Next Page
Loading...
Need help?
General
