Domino F Series User Guide

14
Aiming Beam / Pilot Laser
The system contains an aiming beam with a wavelength of 630nm to
670nm.
This laser is a class 1 laser.
Harmful Dust and Vapours
When radiating materials by means of a laser, harmful dust and vapours
can be produced. The user is responsible for appropriate measures,
e.g. an exhaust system, to reduce such harmful dust and vapours to a
level that complies with the allowed maximum concentration of
pollutants at the work place.
Touching the Lens
Fused silica lenses are used in the F-Series laser system.
Lenses must not be touched.
If the lens has been soiled, it must be thoroughly cleaned before any
operation.
Class 4
The accessible laser radiation may be visible or invisible.
Direct and diffuse radiation is extremely harmful to eyes
and skin and can pose a fire risk if projected onto
combustible materials.
The F-Series laser marking systems, taken by
themselves, are Class 4 and must not be used until
suitable, interlocked guarding is fitted to achieve a Class
1 laser installation that physically prevents access to the
laser radiation or automatically disables the laser when
access is required to the marking area (for cleaning or
maintenance, etc.).

Domino F Series Specifications

General

Brand	Domino
Model	F Series
Category	Measuring Instruments
Language	English