3
WARNINGS: (1) As supplied, this coder is a class 4 laser
product. During operation, it will emit up to 40
watts of pulsed invisible laser radiation at a
wavelength between 1030 and 1120
nanometers. Avoid eye or skin exposure to
direct or scattered radiation.
(2) The products contain embedded laser devices
that emit invisible radiation in the region of 900
- 1000 nm with a total output power of up to
120W for the rated output power of the laser
modules: this radiation is not accessible to the
user unless the protective housing is opened.
(3) The laser may emit significantly higher powers
under a single fault condition (<120 W 1030 –
1200 nm; <100 W 900 – 1000 nm).
(4) This coder must be fitted with class 1 laser
safety guarding, to safeguard against
accidental exposure to direct or scattered
radiation before it is operated or made ready
for use.
(5) Guidance on creating and fitting laser
guarding can be found in part 1 of the Product
Manual.
(6) Use of controls or adjustments of
performance or procedures, other than those
specified in this manual, may result in
hazardous radiation exposure.